Design of Steel Structures MCQs questions and answers for all competitive exams like PPSC NTS FPSC KPPSC SPSC ETEA. Design of steel structures MCQs pdf and Design of steel Structures Solved problems PDF.
When a small cylinder is under internal pressure, the tension in the wall is :
A. Shear
B. Torsional shear
C. Hoop tension
D. Hoop compressionThe portions of the lateral system that are commonly used to transfer shear force in built-up columns include:
A. Rolled angles
B. Rolled channels
C. Rolled steel flats
D. All the aboveIn the virtual work method, the virtual quantity is ___ ?
A. Slope
B. Moment
C. Displacement
D. LoadThe maximum permissible span of asbestos cement sheets is ____ ?
A. 1680 mm
B. 1250 mm
C. 650 mm
D. 810 mmThe portal bracing in a truss bridge is used to ___ ?
A. Stiffen the structure laterally
B. Prevent the sides-way buckling of top chord
C. Transfer load from top of end posts to bearings
D. Keep the rectangular shape of the bridge cross-sectionLacing bars in a steel column should be designed to resist :
A. 2.5% of the column load
B. Bending moment due to 2.5% of the column load
C. Shear force due to 2.5% of the column load
D. None of themThe elastic strain for steel is about _____ ?
A. 1/2 of strain at the initiation of strain hardening and about 1/12 of maximum strain
B. 1/24 of strain at the initiation of strain hardening and about 1/200 of maximum strain
C. 1/12 of strain at the initiation of strain hardening and about 1/120 of maximum strain
D. 1/12 of strain at the initiation of strain hardening and 1/200 of maximum strainIf the floor is supported at or near the bottom but top chords of a bridge is not braced, then the bridge is called:
A. Through type
B. Double deck type
C. Deck type
D. Half through typeThe effective length of a fillet weld should not be less than:
A. Four times the weld size
B. Weld size
C. Two times the weld size
D. Six times the weld sizeIn a plate girder, rivets connecting flange angles to cover plates are visible to:
A. Vertical load only
B. Horizontal shear only
C. Both a and b
D. None of them