Airport Engineering MCQs involve the planning, design, and construction of airports and related facilities to ensure the safe and efficient movement of aircraft, passengers, and cargo. Includes a Civil Engineering MCQs PDF book, Airport Engineering MCQs PDF free download, and Railway and Airport Engineering MCQ questions.
As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of _____ ?
A. 0.3 %
B. 0.4%
C. 0.1 %
D. 0.2%Engine failure case for determining the basic runway length may require _____ ?
A. either a clearway or a stopway
B. only clearway
C. only stop way
D. either a clearway or a stopway or bothAn airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilisation factor is 0.5, then the capacity of the gate will be ____ ?
A. 4 aircrafts per hour
B. 8 aircraft per hour
C. 1 aircraft per hour
D. 17 aircraft per hourSlope of the transitional surface for A, B and C type of runway shall be _____ ?
A. 2:6
B. 3:5
C. 7:3
D. 1:7As per UK design criteria, if LCN of aircraft is between 1.25 to 1.5 times the LCN of pavement, then the number of movements allowed are _____ ?
A. 300
B. 230
C. Zero
D. UnrestrictedCentre to centre spacing of heliport lighting along the periphery of landing and take off area should be ____ ?
A. 5.5 m
B. 7.5 m
C. 2.8 m
D. 1.6 mIn Intrumental landing system, the middle markers are located ____ ?
A. at the runway threshold
B. along the extended centre line of runway end
C. about 1 km. ahead of the runway threshold
D. All of themRunway threshold is indicated by a series of parallel lines starting from a distance of _____ ?
A. 6 m from runway end
B. 16 m from runway end
C. 3 m from runway end
D. 10 m from runway endFor determining the basic runway.length, the landing case requires that aircraft should come to a stop within p % of the landing distance. The value of p is ____ ?
A. 20 %
B. 100 %
C. 40 %
D. 60%As per ICAO, for airports serving big aircrafts, the crosswind component should not exceed _____ ?
A. 65 kmph
B. 35 kmph
C. 15 kmph
D. 25 kmph